Funmat HT Enhanced

PRINT PEEK & ULTEM™ 

STRAIGHT OUT OF THE BOX

The Intamsys Funmat HT Enhanced is designed specifically to 3D print high-performance functional materials like PEEK, PEI and PPSU, in addition to a broad range of engineering thermoplastics. 


Users can achieve 50-micron, high-resolution, industrial-quality 3D printing with the Intamsys Funmat HT.

$6,999.00
FOR ADVANCED USERS ONLY. REQUIRES SOME TECHNICAL SKILLS TO OPERATE AND MAINTAIN.
  • 450°C Extruder
  • 160°C Buildplate
  • 90ºC Chamber

DESIGNED FOR
HIGH-PERFORMANCE POLYMERS

Build Volume:

260 x 260 x 260 mm

Heat Resistance

HEAT RESISTANCE

Designed for materials which perform at operating  temperatures past 300°C - extruded at 400°C and above, they are the  world's highest-performing polymers.

Chemical Resistance

CHEMICAL RESISTANCE

These materials exhibit excellent resistance to abrasion, chemicals, solvents, grease & oils, radiation, and perform in a variety of  other extreme environments.

High Strength

EXTREME STRENGTH

Many of these polymers are used to replace metal; combining high strength-to-weight ratio and rigidity with chemical resistance and heat deflection, they can often be used  where metal cannot.

ENGINEERING THERMOPLASTICS

Choose any 1.75mm filament: PEEK, CFPEEK, ULTEM™ 1010, ULTEM™ 9085, PSU, PPS, CFPA6, and more
  • Filament Absent Warning

    When filament is getting low, a sensor triggers an alarm, and allows you to add new material. Never worry about low filament again!

  • Battery Backup

    Power surges and failures? The Funmat HT has it's own battery backup to pause prints, and resume when the power returns. Essential when you're running important projects, or expensive filaments.

  • Auto Bed Leveling

    Bed leveling is easier than ever, with a new 3-point automatic leveling system. You can also manually level as before, if needed.

  • Accurate to 12.5 Microns

    Cutting-edge motors and drivers enable extremely high precision, resulting in incredible print quality, up to 12.5 microns

  • Pre-Configured Slicer from INTAMSYS

    Printer profiles are pre-configured in the INTAMSUITE software for easy operation, straight out of the box

  • Compatible with Industry-Standard Slicing Software

    Not feeling INTAMSUITE? You can also use the latest Cura, Simplify3D, Slic3r, and other toolpath generators (recommended)

Funmat HT Enhanced
$6,999.00

Detailed Specifications

Printing Technology

Fused Filament Fabrication, or Fused Deposition Modeling (FFF, FDM)

Build Volume

260 x 260 x 260mm

10.2" x 10.2" x 10.2"

Build Platform Material

Carbon Fiber Platform

Silicone Heater

Ceramic Glass

Build Plate Leveling

3-Point Automatic Leveling, Manual Leveling

Layer Resolution

0.05-0.3mm, 50 Micron 

100-200 Micron Standard

Speeds

Movement: 300mm/s 

Printing: Avg ~100mm/s

Filament Diameter

Standard 1.75mm Filament

Open Material System

Nozzle Diameter

Universal M6x1 Threading

0.1, 0.25, 0.4, 0.6, 0.8and more

Position Accuracy

12.5 Microns X/Y
50 Microns (minimium layer height)

Firmware

Marlin Fork from 2017

Available Here

Extruder Temperature

450°C (842°F)

Build Plate Temperature

160°C (320°F)

Chamber Temperature

90°C (320°F)

Input File Type

Standard G-code, Marlin based

Power Consumption

1200W, 110V, 10A breaker minimum. We run two Funmat HT's at full heat on a single 20A breaker.

Machine Dimensions

21" Wide x 19" Deep x 26" Tall

Allow 12" on right side and top, for bay doors to open

Shipping Weight & Dimensions

Fused Filament Fabrication, or Fused Deposition Modeling (FFF, FDM)

Materials

Any 1.75mm Filament, including: PEEK, PEI, PEI Blends, PPSU, PA/CF, PC, PC Alloys, PA, ABS, Carbon Fiber-Filled, Metal-Filled, Fiberglass-Filled, Nylon, ASA, PETG, ESD-Safe, HIPS, TPU, PLA, PVA, Open Material System

Warranty

One Year Manufacturers Warranty, except on consumables

$6,999.00