Extruder: Between 260 and 300°C depending on your printer / extruder. Ideal layer bonding is typically possible at 275 - 280°C.
Platform Temp: 110 - 120°C
Platform Prep: Kapton Polyimide w/ ABS Acetone Slurry coating, VM105 Polymer Adhesive
Drying: PC absorbs moisture from the environment, therefore it is important to keep this filament dry between uses. You will see bubbles / hear popping if the PC gets wet. If this happens, dry the filament in a small oven at 150°F for 3-4 hours. Note, the typical drying temperature for PC is 120°C (not F), but the reel that the filament is supplied on will fail at 120°C. Therefore, do not dry the filament at this temperature unless you remove the length you want to print with from the reel.
Diameter: 1.75mm (+/- 0.05mm)
Color: Black
Nozzle Temperature: 240 – 280°C (all-metal extruder required)
Buildplate Temperature: 100 – 120°C
Chamber temperature: 0-70°C
Bed Prep: Nano Polymer Adhesive, PVP Glue Stick, Kapton Tape + PVP
Cooling: None
Print speed: of 40-70mm/s
