INTAMSYS Funmat HT 3D Printer – Vision Miner
  2. All Products
  3. Funmat HT

Funmat HT

Intamsys
$5,750.00 $5,900.00

NO LONGER AVAILABLE

See the HT ENHANCED!

   

These are the original Funmat HT, with motherboard/wiring upgrades -- robust machines, brand-new, never used, with upgraded electronics and hardware. 

Already have a Funmat HT? Double your production, and re-use all your old hardware and build plates. 


Build volume of the FUNMAT HT is 260 x 260 x 260 mm, and you can use any 1.75mm filament.




Reviews

2 reviews Write a review

High Performance, Functional Material 3D Printer

High Temperature Nozzle

High temp, all-metal hotend heats up to a blistering 450°C

Insulated & Heated Chamber

Fully-enclosed environment helps printing without warping or curling issues

Aerospace, Medical, and Automotive Grade Materials

Designed to print PEEK, PC, ULTEM™ (PEI) and many other high-strength composites, comparable to metals



Vision Miner Service & Support

   

Funmat HT 8-Minute Overview

   

Quick Start Guide



 

Seriously cutting-edge

  • Filament Absent Warning 
    When filament is getting low, a sensor triggers an alarm to warn you

  • Battery Back-up
    Power surges and failures? Each Funmat has it's own battery backup to pause prints, and resume when the power returns. 

  • Built-in Camera
    Monitor your prints remotely with through a mobile app
     
  • Accurate to 12.5 microns
    Cutting-edge components enable extremely high precision, resulting in incredible print quality up to 12.5 microns
     
  • Pre-Configured
    Printer profiles are pre-configured in our software for easy operation, straight out of the box.
     
  • INTAMSYS Slicing Engine
    INTAMSUITE is our proprietary slicing software, developed in-house, designed specifically for our machines.
     
  • Print Immediately
    Based on industry-standard CURA, we've included detailed settings and parameter profiles for each of our printers. This enables you to seamlessly print any STL, OBJ, or GCode files within minutes of opening your printer.
     
  • Compatible with industry software
    Our printers are also, of course, fully compatible with CURA, Simplify3D, and other slicing software.

PDF Brochure

INTAMSYS Overview PDF

Technical Details

Printing Technology
  • Fused Filament Fabrication (FFF, FDM)
Build Volume
  • 260 x 260 x 260mm (10.2 x 10.2 x 10.2in)
Build Platform
  • Aluminum Plate + High Borosilicate Glass (one frosted side)
Layer Resolution
  • 0.05-0.3mm
Print Speed
  • 30-300mm/s
Extruder Temperature
  • 450°C (842°F)
Platform Temperature
  • 160°C (320°F)
Chamber Temperature
  • 90°C (320°F)
Input File Type
  • STL, OBJ, GCode
Materials
  • PEEK, ULTEM™, PPSU, PA/CF, PC, PC Alloys, PA, ABS, Carbon Fiber-Filled, Metal-Filled, Fiberglass-Filled, Nylon, ASA, PETG, ESD-Safe, HIPS, TPU, PLA, PVA, ETC.
Filament Diameter
  • 1.75mm
Nozzle Diameter
  • 0.2mm .3mm .4mm .5mm .8mm
Position Accuracy
  • XY axis: 12.50μm
  • Z axis: 1.25μm
Power Consumption
  • 1500W

Schematic

Intamsys Funmat HT - Layout Diagram - Front SideIntamsys Funmat HT - Layout Diagram - Right SideIntamsys Funmat HT - Layout Diagram - Left Side


 

1.  Display 5.  Build Plate 9.  Door Handle 13.  Camera (inside)
2.  Push/Rotate Button 6.  Build Plate Clamps 10.  Spool Holder 14.  Power Socket
3.  SD Card Slot 7.  Build Plate Leveling Screws 11.  Handle 15.  Power Switch
4.  Camera (Inside Corner) 8.  Heating Fans 12.  Filament Absent Detection Switch 16.  USB Socket

Set up the printer

  1. All the maintenance should be in power off mode.
  2. Gently place the printer on a flat and strong platform. Use the Allen key to remove the four screws holding the X & Y axis .
  3. Install the motor above the extruder, and ensure the bowden tube is in its proper position.
  4. Open the front door to insert the glass plate and fix the glass plate with the screw on the right side of the platform.
  5. Connect the power cable and power on your printer.

User Manual

Download User Manual


 

Customers Also Bought: