Filament Material and Technical Data Sheets

 

SABIC Datasheets

Solvay Datasheets

3DXTech Filament Datasheets

 

Grade

TDS

SDS

Printing Difficulty Level*

CarbonX™ Carbon Fiber PEEK Carbon Fiber PEEK PEEK 3D Filament Carbon Fiber  EXPERT
CarbonX™ Carbon Fiber PEI Carbon Fiber Ultem Carbon Fiber Ultem Filament SDS  EXPERT
CarbonX™ Carbon Fiber NYLON Gen3 Carbon Fiber Nylon Filament TDS Carbon Fiber Nylon Filament SDS  INTERMEDIATE
THERMAX™ PEKK PEKK Kepstan Arkema 3D Filament Antero PEKK Kepstan Arkema 3D Filament Antero  EXPERT
THERMAX™ PEEK PEEK 3D Filmanet Carbon Fiber PLA SDS EXPERT 
THERMAX™ PEI [9085] Ultem 9085 3D Filament Ultem 9085 Filament SDS  EXPERT 
THERMAX™ PEI [1010] Ultem 1010 Filament Ultem 1010 Filament SDS  EXPERT 
THERMAX™ PPSU PPSU PPSF Filament PPSU PPSF Filament SDS  EXPERT 
THERMAX™ PSU PPSU PPSF Filament PSU Filament SDS  EXPERT 
THERMAX™ PPS PPSU PPSF Filament PPSU PPSF Filament  ADVANCED
FluorX™ PVDF PPSU PPSF Filament PPSU PPSF Filament  ADVANCED
REACH Documentation    REACH Document


Printing Data

Printing Specs

Nozzle Temp Build Plate Temp Chamber Temp Dry Material? Dry Temp Dry Time Annealing Anneal Temp Anneal Time
ABS 240-255°C 90°C 70°C
Top open
sometimes, rarely 60C 1-4 hours No
CFPA6 (CF Nylon) 245-260°C 90°C 70°C Yes 70°C 3-14 hours No
Nylon 240-255°C 90°C 70°C Yes 70°C 3-14 hours No
PC 255-270°C 100°C 70°C Yes 70°C 3-8 hours No 120°C 1-4 hours
PEEK 400-415°C 160°C 90°C Yes 70-120°C 3-48 hours Yes 160°C 2-4 hours
PEI (1010) 355-370°C 160°C 90°C Yes 70-120°C 3-24 hours Yes 160°C 2-4 hours
PEI Blend (9085) 340-360°C 160°C 90°C Yes 70-120°C 3-24 hours Yes 160°C 2-4 hours
PLA 195-210°C 60°C 23°C
Doors Open
Rarely 60°C 1-3 hours No
TPU Flex ~240°C 90°C 23°C
Top open
Yes 60°C 1-4 hours No

 

ULTEM™ is a trademark of SABIC, or its subsidiaries or affiliates.