Triton3D by 3DXTECH · Stratasys®-compatible · made in the USA

Stop overpaying for Stratasys filament

Same materials, up to 60% less than OEM. Triton3D canisters drop into your Fortus® or Dimension® and ship with a fresh EEPROM chip. No hacks, no settings to change.
1Pick your printer.We'll match the chip on every canister you add.

No printer picked yet.

Not sure if you're Classic or Plus? Call 833-774-6863

Standard

from $95

ABS, ASA, PC, PC-ABS

Shop ›

PEI / ULTEM™

from $525

9085, 1010, ESD 1010

Shop ›

Specialty

from $125

ESD, flame-retardant, CF, GF

Shop ›

Support

from $150

Break-away for every material

Shop ›

How it works

Load it and print

Trusted for nearly a decade in aerospace, medical and energy shops. 3DXTECH backs every canister with a 100% compatibility guarantee.

Step 1

Pick your printer

That tells us which EEPROM chip to send: Classic, Plus or Dimension.

Step 2

Load the canister

Same canister, same loading steps as the OEM refill. Install videos below.

Step 3

Swap the chip, print

Plug in the new chip, pick the usual material in Insight or GrabCAD, and go.

Engineering grade

Standard materials

The everyday canisters. ABS and ASA come in ten colors.
ABS canister
Alt. to ABS-M30

ABS

The workhorse. Ten colors, and the only Triton you can get in every canister size up to 750in³.

EEPROM chip: -- change

from$95
ASA canister
Alt. to ASA

ASA

UV-stable with a low-gloss finish that hides layer lines. For parts that live outside.

EEPROM chip: -- change

from$125
PC canister
Alt. to PC · 355-02210 / 355-08210

PC

Made from SABIC Lexan™ PC resin, in more colors than Stratasys sells.

EEPROM chip: -- change

from$295
PC-ABS canister
Alt. to PC-ABS

PC-ABS

PC strength with ABS toughness. A solid pick for functional housings and fixtures.

EEPROM chip: -- change

from$295

Ultra performance

PEI / ULTEM™

Made with SABIC ULTEM™ resin. This is where the savings add up fastest.
PEI 9085 canister
Made with ULTEM™ 9085 resin

PEI 9085

The aerospace material. Flame-retardant, strong and dimensionally stable.

EEPROM chip: -- change

from$525
PEI 1010 canister
Made with ULTEM™ 1010 resin

PEI 1010

Higher heat than 9085. Tooling, molds and under-the-hood parts.

EEPROM chip: -- change

from$525
ESD-PEI 1010 canister
TriStat™ ESD · ULTEM™ 1010 resin

ESD-PEI 1010

ESD-safe

ESD-safe PEI. High heat, inherently flame-retardant, for electronics fixtures.

EEPROM chip: -- change

from$795

Triton specialty

ESD, flame-retardant & fiber-filled

For fixtures on the electronics line, parts with a flame spec, and stiff lightweight tooling.
FR-PC-ABS canister
Alt. to FR PC-ABS

FR-PC-ABS

Flame-retardant

UL-94 V0 base resin. For enclosures and parts that have to pass a flame spec.

EEPROM chip: -- change

from$350
ESD-ABS canister
Alt. to ABS-ESD7

ESD-ABS

ESD-safe

TriStat™ ESD compound. Static-safe fixtures for electronics assembly.

EEPROM chip: -- change

from$125
ESD-PC canister
Alt. to ESD-PC

ESD-PC

ESD-safe

Runs in any PC-capable Fortus with no setting changes.

EEPROM chip: -- change

from$295
ABS+CF canister
TriMax™ CF-ABS

ABS+CF

Carbon fiber

Carbon fiber ABS. Stiffer and lighter than plain ABS, with a clean matte surface.

Fiber-filled wears tips about 2x faster. GBX hardened tips ›

EEPROM chip: -- change

from$125
ABS+GF canister
TriMax™ GF-ABS · runs on the ABS-M30 chip

ABS+GF

Glass fiber

SABIC MG-94 ABS with 10% glass fiber. High stiffness, holds its size.

Fiber-filled wears tips about 2x faster. GBX hardened tips ›

EEPROM chip: -- change

from$295
Nylon 12+CF canister
Alt. to PA12CF · 355-02411

Nylon 12+CF

Carbon fiber

Low moisture pickup and good resistance to fuel, oil and lubricants.

Fiber-filled wears tips about 2x faster. GBX hardened tips ›

EEPROM chip: -- change

from$495

Support

Break-away support

Match the support to your model material.
ABS / ASA Break-Away canister
Support for ABS and ASA

ABS / ASA Break-Away

Break-away support for ABS and ASA builds.

EEPROM chip: -- change

from$150
PC Break-Away canister
Support for PC · PC BASS settings

PC Break-Away

Runs on your PC BASS support settings.

EEPROM chip: -- change

from$325
9085 Break-Away canister
Support for PEI 9085

9085 Break-Away

Break-away support for 9085 builds.

EEPROM chip: -- change

from$525
1010 Break-Away canister
Support for PEI 1010

1010 Break-Away

Matches the OEM support for ULTEM™ 1010 builds.

EEPROM chip: -- change

from$525

Compatibility

Which printers, which chip

Fortus® 360mc, 400mc, 450mc, 900mc, F900, Titan™ and Vantage™ take the 92in³ and larger canisters. Dimension® and Fortus 250mc take 56in³.

Your printer

Chip we send

Canisters

Fortus 360 / 400 / 900mc (Classic)

Classic Fortus

92 · 184in³

Fortus 360 / 380 / 400 (Plus)

Plus Fortus 360/380/400

92 · 184in³

Fortus 450mc

Plus Fortus 450MC

92 · 184in³

Fortus 900mc Plus / F900

Plus Fortus 900MC/F900

92 · 184in³

Dimension 1200es / Elite, Fortus 250mc

P430 chip

56in³

Dimension 768 / 1200, Prodigy

P400 chip

56in³

Per 3DXTECH's chart: Dimension, Prodigy and Fortus 200/250mc run ABS, ESD-ABS, CF-ABS and ASA. Titan / Vantage run those plus PC-ABS and 9085. Running a Titan or Vantage, or want the 500 / 750in³ ABS and ASA canisters? Call us to confirm fit.

Watch

See it run

Our walkthrough first, then 3DXTECH's install guides.

Save money on Stratasys materials with Triton3D

Vision Miner · 14:03

Installing reels: Fortus 900mc, 400mc, 360mc, Titan, Vantage

3DXTECH install guide

Installing a 56in³ refill: Dimension & Fortus 250mc

3DXTECH install guide

Triton3D: Stratasys-compatible filament

3DXTECH overview

Questions

Before you switch

Most of these come up on the first call. If yours isn't here, ask us.

Will it void my warranty?

Most Fortus machines are past OEM warranty when shops switch. If yours is still covered, call us first.

Classic or Plus: which chip do I need?

Fortus machines built before the Plus update take the Classic chip. Plus machines take the Plus chip. Not sure? Call us at 833-774-6863 and we'll sort it out.

Where is it made?

3DXTECH makes every Triton canister in their 68,000 ft² plant in Grand Rapids, Michigan.

What's the EEPROM chip for?

Your printer reads the chip on each canister to know the material and how much is left. Every Triton canister ships with a fresh chip for your printer, so you swap it in and print as usual.

Do I change any settings?

No. Load the canister, swap in the chip and pick the same material you would for the Stratasys version. ABS+GF runs on the ABS-M30 chip.

What about fiber-filled materials?

CF and GF wear tips about twice as fast as unfilled ABS. Keep spare GBX hardened tips on the shelf.

Running a fleet of Fortus machines?

› Get a volume quote

› Call 833-774-6863

› contact@visionminer.com

Keep it running

Round out your setup

Fortus parts

GBX hardened tips ›

Spare EEPROM chip ›

Other materials

All materials ›

Carbon fiber ›

Data sheets

Technical data sheets ›

Drying filament ›

Help

Support ›

Contact us ›

Quality guarantee

Try one canister

If it doesn't run in your printer, call us and we'll make it right.

Pick your printer

Call 833-774-6863

Trademark disclaimer

Stratasys®, Fortus®, Dimension®, Titan®, Vantage®, and Prodigy™ are trademarks or registered trademarks of Stratasys Ltd. and/or its subsidiaries and affiliates in the United States and other countries. ULTEM™ is a trademark of SABIC, its affiliates, or subsidiaries. Any other trademarks, service marks, logos, or trade names referenced on this website are the property of their respective owners.

All references to these marks are provided strictly for identification, descriptive, and compatibility purposes, to inform customers that certain third-party products offered by Vision Miner are designed to be used with Stratasys® 3D printers and/or manufactured using, or compatible with, ULTEM™ resins. Vision Miner is an independent supplier of third-party consumables, printers, and accessories and is not endorsed by, sponsored by, affiliated with, or in any way officially associated with Stratasys Ltd., SABIC, or any of their subsidiaries or affiliates.

Nothing on this website should be construed to imply any such endorsement, sponsorship, or affiliation. Vision Miner makes no claim of ownership of these trademarks and expressly disclaims any and all rights therein. All rights remain exclusively with their respective owners.

My Wishlist

View wishlist

Wishlist is empty.

Compare

Shopping cart

Your cart is empty.

Return to shop
close