Filament Material and Technical Data Sheets
3DXTech Filament Datasheets
|
Grade |
TDS |
SDS |
Printing Difficulty Level* |
| CarbonX™ Carbon Fiber PEEK |  |
|
EXPERT |
| CarbonX™ Carbon Fiber PEI | |
|
EXPERT |
| CarbonX™ Carbon Fiber NYLON Gen3 | |
|
INTERMEDIATE |
| THERMAX™ PEKK | |
|
EXPERT |
| THERMAX™ PEEK | |
|
EXPERT |
| THERMAX™ PEI [9085] | |
|
EXPERT |
| THERMAX™ PEI [1010] | |
|
EXPERT |
| THERMAX™ PPSU | |
|
EXPERT |
| THERMAX™ PSU | |
|
EXPERT |
| THERMAX™ PPS | |
|
ADVANCED |
| FluorX™ PVDF | |
|
ADVANCED |
|
REACH Documentation
|
|||
Recommended Printing Experience
Novice: A beginner using an entry-level 3D printer should have minimal problems using this material
Intermediate: User has several months of experience with a moderate to high quality printer
Advanced: User has > 1 year of printing experience and is using a high quality commercial printer
Expert: User has significant amount of experience and is using a high-performance or heavily modified printer
These categories are somewhat arbitrary, but come from many years of our own printing experience as well as troubleshooting with customers.
ESSENTIUM Datasheets
PCTG
HTN
HTN CF25
SABIC Datasheets
- SABIC ULTEM™ AM9085F Filament (TDS)
- SABIC ULTEM™ AM1010F Filament (TDS)
- SABIC AMS31F ULTEM™ Support filament (MDS)
- SABIC ULTEM™ Safety Data Sheet (DOWNLOAD)
- SABIC ULTEM™ Support Filament Processing Guide (DOWNLOAD)
Solvay Datasheets
- KetaSpire® AM FILAMENT MS NT1 POLYETHERETHERKETONE (PEEK) (MDS)
- KetaSpire® AM FILAMENT CF10 LS1 POLYETHERETHERKETONE (CFPEEK) (MDS)
- RADEL® AM FILAMENT MS NT1 POLYPHENYLSULFONE (PPSU) (MDS)
General Printing Data
>
|
Printing Specs |
Nozzle Temp | Build Plate Temp | Chamber Temp | Dry Material? | Dry Temp | Dry Time | Annealing | Anneal Temp | Anneal Time |
| ABS | 240-255°C | 90°C | 70°C Top open |
sometimes, rarely | 60C | 1-4 hours | No | ||
| CFPA6 (CF Nylon) | 245-260°C | 90°C | 70°C | Yes | 70°C | 3-14 hours | No | ||
| Nylon | 240-255°C | 90°C | 70°C | Yes | 70°C | 3-14 hours | No | ||
| PC | 255-270°C | 100°C | 70°C | Yes | 70°C | 3-8 hours | No | 120°C | 1-4 hours |
| PEEK | 400-415°C | 160°C | 90°C | Yes | 70-120°C | 3-48 hours | Yes | 160°C | 2-4 hours |
| PEI (1010) | 355-370°C | 160°C | 90°C | Yes | 70-120°C | 3-24 hours | Yes | 160°C | 2-4 hours |
| PEI Blend (9085) | 340-360°C | 160°C | 90°C | Yes | 70-120°C | 3-24 hours | Yes | 160°C | 2-4 hours |
| PLA | 195-210°C | 60°C | 23°C Doors Open |
Rarely | 60°C | 1-3 hours | No | ||
| TPU Flex | 240°C | 90°C | 23°C Top open |
Yes | 60°C | 1-4 hours | No | ||
| 3DXTech HTN+CF | 285-315°C | 110-120°C | 80-120°C | Yes | 120 | 4-12hrs | |||
| 3DXTech CFPA12 | 265-280°C | 90-110°C | 50-90°C | Yes | 90°C | 4-12hrs | |||
| 3DXTech PA6 GF30 | 260-280°C | 60-75°C | 40-80°C | Yes | 70°C | 4-12hrs | |||
| Essentium HTN | 270-315°C | 70-120°C | 80-120°C | Yes | 120°C | 4-12hrs | |||
| 3DXTech CFPC | 280-310°C | 110-120°C | 50-90°C | Yes | 110°C | 4-12hrs | |||
| 3DXTech PSU | 350-380°C | 140-160°C | 90°C+ | Yes | 120°C | 4-12hrs | |||
| 3DXTech PPS | 315-345°C | 120-160°C | 90°C+ | Yes | 120°C | 4-12hrs | |||
| 3DXTech PP+CF | 220-250°C | 23-60°C | None | No | |||||
| 3DXTech PVDF | 265°C | 110-130°C | None | No | |||||
| 3DXTech PCTG | 250-270°C | 70-80°C | None | Yes | 70°C | 2-8hrs |
ULTEM™ is a trademark of SABIC, or its subsidiaries or affiliates.
My Wishlist
Wishlist is empty.
Compare
Shopping cart
