Materials / Filament

PEEK


POLYETHER ETHER KETONE
PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures.

3DXTech

PEEK
Filament Image

PEEK has exceptional mechanical, thermal, and chemical resistance properties making it a go-to material in some of the most demanding applications. The Polyaryletherketone (PAEK) family of thermoplastics exhibit exceptional thermal, chemical, and mechanical properties. 

$325.00

3DXTech

CFPEEK
Filament Image

CarbonX™ CF-PEEK is one of the premier polymers in FFF/FDM 3D Printing. Made using high-modulus carbon fiber for exceptional stiffness, strength, and dimensional stability.

$325.00

PEKK


POLYETHERKETONEKETONE
A leading material in the PAEK family, PEKK has exceptional mechanical, thermal, and chemical resistance properties, while being substantially easier to print than PEEK.

3DXTech

PEKK
Filament Image

ThermaX™ PEKK (PolyEtherKetoneKetone) is made using Arkema Kepstan® PEKK and is one of the highest-performance polymers in world. A leading material in the PAEK family, PEKK has exceptional mechanical, thermal, and chemical resistance properties, while being substantially easier to print than PEEK.

$365.00

PEI


POLYETHERIMIDE (ULTEM™ by SABIC)Polyetherimide is an amorphous, amber-to-transparent thermoplastic with characteristics similar to the related plastic PEEK. Relative to PEEK, PEI is cheaper, but is lower in impact strength and usable temperature

3DXTech

PEI 1010
Filament Image

PEI is an amorphous, high-performance polymer that combines excellent thermal properties, exceptional dimensional stability, inherent flame retardancy, and good chemical resistance. Filaments made using ULTEM™ 1010 resin offer the ability to create parts with excellent properties at elevated temperatures due to a high glass transition temperature (Tg) of 217°C.

$100.00

3DXTech

PEI 9085
Filament Image

Filaments made from ULTEM™ 9085 resin offers the ability to create parts with excellent properties at elevated temperatures due to a high glass transition temperature (Tg) of 186°C. PEI is an amorphous, high-performance polymer that combines excellent thermal properties, exceptional dimensional stability, inherent flame retardancy, and good chemical resistance.

$125.00

3DXTech

CFPEI 1010
Filament Image

CarbonX™ Carbon Fiber Reinforced PEI (Polyether Imide) is manufactured using a custom-formulated compound made from ULTEM™ PEI resin and high-modulus carbon fiber. PEI is an amorphous, high-performance polymer that offers excellent mechanical, thermal, and chemical resistance properties.

$150.00

SABIC

ULTEM™ 1010
AM1010F
Filament Image

Genuine SABIC ULTEM 1010 1.75mm Filament

$205.00

SABIC

ULTEM™ 9085
AM9085F
Filament Image

Genuine SABIC ULTEM 9085 1.75mm Filament

$225.00

PPSF/PPSU


POLYPHENYLSULFONE
Long considered to be one of the highest performance polymers in the world, PPSF has excellent thermal and chemical resistance, making it well suited for demanding applications in automotive, aerospace, electronics, defense, industrial, and medical applications.

3DXTech

PPSF/PPSU
Filament Image

ThermaX™ is 3DXTECH's brand of high-temperature polymers designed specifically for 3D printing the highest performance parts possible. PPSU is sold using names such as Solvay's Radel R and BASF's Ultrason P.

$125.00

PSU


POLYSULFONE
A high-temperature aromatic sulfone polymer. PSU has excellent thermal and chemical resistance, making it well suited for demanding applications in automotive, aerospace, electronics, defense, food service, industrial, plumbing, medical, semi-con applications.

3DXTech

PSU
Filament Image

PSU has excellent thermal and chemical resistance, making it well suited for demanding applications in automotive, aerospace, electronics, defense, food service, industrial, plumbing, medical, semi-con applications.ThermaX™ PSU is an excellent alternative to ULTEM™ 9085.

$90.00

NYLON (PA6)


Polyamide 6 (Nylon) Nylon 6 is tough, possessing high tensile strength, as well as elasticity and lustre. It is widely used for gears, fittings, and bearings, in automotive industry for under-the-hood parts, and as a material for power tools housings. It can also be used in gun frames, such as those used by Glock, which are made with a composite of Nylon 6 and other polymers.

3DXTech

CFPA6
Filament Image

Gen 3 CarbonX™ CF-Nylon Filament is an advanced semi-aromatic polyamide copolymer reinforced with high-modulus carbon fiber. This filament is ideal for anyone that desires a structural component with high modulus, improved chemical and thermal resistance, excellent surface quality, and ease of printing. Tired of nylon that warps? This is the answer you've been looking for. Excellent dimensional stability comes from the carbon fiber and the semi-aromatic nylon.

$68.00

SUPPORTS


Support Filaments Used for supporting overhangs and complex geometry on dual-extruder machines, support filaments are useful to get a great finish and good strength on a part, while pushing the limits of what is possible in FDM. 

SABIC

AMS31F
Filament Image

SABIC’s AMS31F is a breakaway support filament for use with ULTEM™ AM9085F filament. The material maintains rigidity during printing and provides exceptional pliability during post processing to enable easier removal of structural supports at room temperature, which can reduce the time required to produce finished parts. 

$245.00