Authorized Formlabs reseller  ·  Financing available  ·  Real people: 833-774-6863

Formlabs · authorized reseller

Formlabs printers

Resin printers for detail and surface finish. SLS printers for nylon parts in volume. Plus the resins, powders, tanks, and post-processing that keep them running, all on one page, from people you can actually call.

Own a Sinterit? Take $5,000 off a new Fuse. Through March 1, 2027, on the Fuse 1+ 30W or Fuse X1. See the offer ›

Shop printers

Get a quote

Download PreForm (free)

from $699

SLA resin

Fine detail and smooth surfaces. Prototypes, molds, dental.

Form Studio 1 · Form 4 · Form 4L ›

from $24,649

SLS powder

Tough nylon parts, no supports, production runs.

Fuse 1+ 30W · Fuse X1 ›

resins & powders

Materials

Formlabs resins in 1 L and 5 L, plus nylon and TPU powders.

Shop materials ›

tanks, platforms, chambers

Parts & spares

Tanks, build platforms, wash and cure, Sift and Blast.

Shop everything ›

Alt image

Watch

Formlabs, from Vision Miner

Why we started selling Formlabs, and a quick tour of the Form 4, Form 4L, and Fuse 1+ 30W.

More videos ›

Which process?

Start with the part

What the part has to do usually picks the process. If two would work, we'll tell you which one costs less to run.

SLA resins

When it has to look finished

Liquid resin cured by light, one layer at a time. You get the smoothest surfaces and finest detail of anything we sell: the pick for visual prototypes, molds, dental work, and parts that get handed to a customer.

The trade: parts need supports, and they need a wash and a cure.

See resin printers ›

SLS powders

When it has to work, by the hundred

Nylon powder fused by a laser. The powder holds the parts up, so there are no supports, and you pack the whole chamber with parts. They come out tough and functional, with a slightly grainy matte finish.

The pick for end-use parts and short production runs.

See SLS printers ›

SLA resin · Formlabs Form series

Resin printers

Same PreForm software and the same workflow from the Form Studio 1 up to the Form 4L, so moving up doesn't mean starting over.

Benchtop · most prints under 2 hrs

Form 4

Fast, accurate SLA for prototypes, tooling, and small production parts. Fill the build plate and a full batch takes about as long as one part.

200 x 125 x 210mm

50 µm pixels

23 resins

from $2,108

View Form 4

Large format · full builds under 6 hrs

Form 4L

Full-size parts in one piece, or big batches of small ones. 4.6x the Form 4 build volume with an even finer 46 µm pixel.

353 x 196 x 350mm

46 µm pixels

2 cartridges

from $5,780

View Form 4L

New · entry SLA

Form Studio 1

Formlabs resin printing at $699, with self-loading cartridges, 35 µm pixels, and the same PreForm workflow as the Form 4.

from $699

View Studio 1

Dental & medical

Form 4B & Form 4BL

The medical versions, for biocompatible resins, with a medical service plan.

from $7,042

Form 4B

Form 4BL

Resins, accessories & spares   SLA resins  ·  Form Wash V2  ·  Form Cure V2  ·  Form Wash L V2  ·  Form Cure L V2  ·  Resin tanks  ·  Build platforms  ·  Alpha Resins  ·  All Formlabs parts

SLS powder · Formlabs Fuse series

SLS printers

Tough nylon parts with no supports. Start on a benchtop with the Fuse 1+, or go straight to production with the Fuse X1.

Benchtop SLS · 120V

Fuse 1+ 30W

Brings nylon production parts in-house on a dedicated 120V circuit. Start with the printer, or a package with Fuse Sift for powder recovery and Fuse Blast for finishing.

165 x 165 x 300mm

30W fiber laser

7 powders

from $24,649

View Fuse 1+ 30W

New · industrial SLS

Fuse X1

7.5x the Fuse 1+ build volume and about 5x the throughput, on single-phase power, through a standard door. A fraction of what legacy SLS and MJF systems cost.

330 x 330 x 565mm

120W fiber laser

30%+ packing

from $84,999

View Fuse X1

Powders, accessories & spares   SLS powders  ·  Fuse Sift  ·  Fuse Blast  ·  Build chambers  ·  Powder cartridges  ·  Depowdering Kit  ·  Industrial vacuum  ·  All Formlabs parts

$5,000

Off a new Fuse

Sinterit owners

Trade up from Sinterit

Sinterit is winding down. If you own a Sinterit printer, take $5,000 off a new Fuse X1 or Fuse 1+ -- and move to a printer with thousands of machines in the field and a fleet of customers you can call.

Offer ends March 1, 2027
--Days
--Hrs
--Min
--Sec

• Through March 1, 2027
• One per customer, new printers only -- not used printers, materials, or accessories
• Send us a photo of your Sinterit printer with your quote request

Request a quote

Side by side

Compare Formlabs printers

 

Form Studio 1

Form 4

Form 4L

Fuse 1+ 30W

Fuse X1

Process

SLA resin

SLA resin

SLA resin

SLS nylon

SLS nylon

Build volume

200 x 125 x 235mm

200 x 125 x 210mm

353 x 196 x 350mm

165 x 165 x 300mm

330 x 330 x 565mm

Best for

Models, minis, getting started

Fast prototypes, detail, tooling

Full-size parts, big batches

Functional parts, short runs

Production volume, big parts

Surface

Smooth, fine detail

Smooth, fine detail

Smooth, fine detail

Matte, slightly grainy

Matte, slightly grainy

Supports

Yes

Yes

Yes

None

None

Printer from

$699

$2,108

$5,780

$24,649

$84,999

Studio 1

Form 4

Form 4L

Fuse 1+

Fuse X1

Who prints on Formlabs

From one-person shops to Tesla

The same printers we sell are running in automotive plants, aerospace labs, and garages. A few results Formlabs customers have published:

Fuse X1

Tesla Giga Nevada prints 20,000 parts a month on Fuse X1 instead of injection molding

Read the case study ›

Form 4

Peak Design went from 1–2 prototype iterations a day to 3–4

Read the case study ›

Form 4L

UbeCube's Form 4L paid for itself in two runs of parts

Read the case study ›

Deutsche Bahn

Fuse printers running 24/7, all year

Case study ›

NASA

Design to functional part within the hour on Form 4

Case study ›

Radio Flyer

90% shorter prototyping timelines with Fuse X1

Case study ›

Brose

End-use Fuse parts in the BMW X7

Case study ›

Free · Windows & Mac

Not sure? Run your part through PreForm.

PreForm is the free software behind every Formlabs printer: no license, no sign-up. Load the same file on a Form 4 and a Fuse 1+ and compare print time and material use before you decide. Then send us the file and we'll walk through it with you.

Download PreForm (free)

Direct download: Windows · Mac (Apple Silicon) · Mac (Intel)

Buy it from people who answer the phone

American service & support

01

Real people, here in America

No scripted auto-attendant. Call 833-774-6863 or email contact@visionminer.com. We cross-train our team on everything we sell, so there's a good chance whoever picks up can solve the problem on the spot.

02

Financing in 60 seconds

Apply right here › The 60-second application opens on this page. Spread the printer over monthly payments instead of waiting on next year's budget.

03

Quotes for purchasing

Need a formal quote for a PO? Request one here and we'll put it together for your purchasing team.

Everything Formlabs

Shop by category

Resin and powder for the printer you have, wash and cure to finish the parts, and the tanks and spares that keep it running.

45+ Formlabs resins

SLA resins

Standard, Tough, Rigid, Flexible, Clear, castable and dental resins in 1 L and 5 L cartridges.

Shop resins ›

for Fuse 1+ and Fuse X1

SLS powders

Nylon 12, Nylon 11, Nylon 12 GF and TPU powder, in the kits your Fuse runs on.

Shop powders ›

post-processing

Wash & cure

Form Wash and Form Cure take parts from printed to finished without a bench full of IPA buckets.

Shop Form Wash ›

tanks, platforms, repair parts

Parts & spares

Resin tanks, build platforms, Wash and Cure parts and Fuse spares. Everything Formlabs we carry.

Shop everything ›

Shopping cart

Your cart is empty.

Return to shop