Funmat HT Enhanced
PRINT PEEK & ULTEM™
STRAIGHT OUT OF THE BOX
The Intamsys Funmat HT Enhanced is designed specifically to 3D print high-performance functional materials like PEEK, PEI and PPSU, in addition to a broad range of engineering thermoplastics.
Users can achieve 50-micron, high-resolution, industrial-quality 3D printing with the Intamsys Funmat HT.
FOR ADVANCED USERS ONLY. REQUIRES SOME TECHNICAL SKILLS TO OPERATE AND MAINTAIN.
-
450°C Extruder
-
160°C Buildplate
-
90ºC Chamber
DESIGNED FOR
HIGH-PERFORMANCE POLYMERS
Build Volume:
260 x 260 x 260 mm
ENGINEERING THERMOPLASTICS
HEAT RESISTANCE
Designed for materials which perform at operating temperatures past 300°C - extruded at 400°C and above, they are the world's highest-performing polymers.
CHEMICAL RESISTANCE
These materials exhibit excellent resistance to abrasion, chemicals, solvents, grease & oils, radiation, and perform in a variety of other extreme environments.
EXTREME STRENGTH
Many of these polymers are used to replace metal; combining high strength-to-weight ratio and rigidity with chemical resistance and heat deflection, they can often be used where metal cannot.
Detailed Specifications
Printing Technology
Fused Filament Fabrication, or Fused Deposition Modeling (FFF, FDM)
Build Volume
260 x 260 x 260mm
10.2" x 10.2" x 10.2"
Build Platform Material
Carbon Fiber Platform
Silicone Heater
Ceramic Glass
3-Point Automatic Leveling, Manual Leveling
Layer Resolution
0.05-0.3mm, 50 Micron
100-200 Micron Standard
Speeds
Movement: 300mm/s
Printing: Avg ~100mm/s
Filament Diameter
Standard 1.75mm Filament
Open Material System
Position Accuracy
Movement: 300mm/s
Printing: up to 150mm/s
Firmware
Marlin Fork from 2017
Extruder Temperature
450°C (842°F)
Build Plate Temperature
160°C (320°F)
Chamber Temperature
90°C (320°F)
Input File Type
Power Consumption
1200W, 110V, 10A breaker minimum. We run two Funmat HT's at full heat on a single 20A breaker.
Machine Dimensions
21" Wide x 19" Deep x 26" Tall
Allow 12" on right side and top, for bay doors to open
Shipping Weight & Dimensions
Fused Filament Fabrication, or Fused Deposition Modeling (FFF, FDM)
Materials
Any 1.75mm Filament, including: PEEK, PEI, PEI Blends, PPSU, PA/CF, PC, PC Alloys, PA, ABS, Carbon Fiber-Filled, Metal-Filled, Fiberglass-Filled, Nylon, ASA, PETG, ESD-Safe, HIPS, TPU, PLA, PVA, Open Material System
Warranty
One Year Manufacturers Warranty, except on consumables
My Wishlist
Wishlist is empty.
Compare
