Authorized Formlabs reseller  ·  Financing available  ·  Real people: 833-774-6863

Nylon 12 · Nylon 11 · Nylon 12 GF · Nylon 11 CF · TPU 90A

Fuse 1+ 30W

A 30W fiber laser, a 165 x 165 x 300mm build chamber you can pack top to bottom, and no support structures at all. The Fuse 1+ puts real nylon production parts on a printer that runs off a dedicated 120V circuit, with no three-phase power and no facility project.

Choose your Fuse 1+ setup

Our recommendation

Complete Package

The whole Fuse workflow: printer, two build chambers, stand, Fuse Sift, and Fuse Blast with the polishing kit. One chamber prints while the other cools, Sift recovers your powder, and Blast cleans and polishes parts in about 15 minutes. This is the one we recommend.

$56,902

Add to cart

Standard Package

Printer, build chamber, stand, powder cartridge, industrial vacuum, and Fuse Sift. No Fuse Blast, so someone bead-blasts every part by hand. Add a Blast later and you're at the Complete package.

$42,094

Add to cart

Starter Package

Printer, build chamber, manual Depowdering Kit, and a powder cartridge. Brushing powder and cleaning parts by hand works for a few builds a month, not for production.

$24,999

Add to cart
What's in each package?

COMPLETE PACKAGE · OUR RECOMMENDATION   $56,902

  • Fuse 1+ 30W printer
  • 2x Build Chamber
  • Printer stand
  • Fuse Sift
  • 2x Powder cartridge
  • Fuse Blast
  • Fuse Blast Polishing Module
  • Polishing agent (115 ml)
  • 2x Polishing media (2.5 kg)
  • Polishing mesh

STARTER PACKAGE   $24,999

  • Fuse 1+ 30W printer
  • Build Chamber
  • Fuse Depowdering Kit with 150 sieve
  • Powder cartridge

STANDARD PACKAGE   $42,094

  • Fuse 1+ 30W printer
  • Build Chamber
  • Printer stand
  • Fuse Sift
  • Powder cartridge
  • Industrial vacuum

FUSE 1+ 30W PRINTER   $24,649

  • Fuse 1+ 30W printer
  • Build Chamber

Just the printer, or setting up four or more? Printer-only and production packages ›

Real people, in America: 833-774-6863

Financing -- apply in 60 seconds ›

Need a quote for a PO? Request one

Want to hold a part first? Request a sample part

No supports

120V dedicated circuit

Nylon & TPU

HEPA + carbon filtration
Alt image

Watch the overview

A full Nylon 12 batch, start to finish

We pack a Fuse 1+ chamber full of Nylon 12 parts and take it all the way through: print, depowder in the Sift, and finish in the Blast.

More videos ›

Add powder

Order powder with the printer

A packed Fuse 1+ build goes through powder faster than people expect. Order enough for your first few builds now. Bulk pricing starts at 20% off when you buy 50 kg and goes as low as $45/kg, so ask us to quote your volume.

The workhorse

Nylon 12 Powder

Strong and chemical-resistant. Our default for functional prototypes and end-use parts.

10 kg

$999

Add

Color

Nylon 12 White Powder

Clean white parts that take dye, for consumer-facing parts and color-coded fixtures.

10 kg

$1,099

Add

Impact

Nylon 12 Tough Powder

More elongation and impact strength than standard Nylon 12, for parts that get abused.

10 kg

$1,099

Add

Glass filled

Nylon 12 GF Powder

Stiffer and more heat-resistant. Brackets, fixtures, and parts under sustained load.

6 kg

$649

Add

Ductile

Nylon 11 Powder

Bends before it breaks. Snap fits, living hinges, and parts that need to flex.

6 kg

$699

Add

Carbon fiber

Nylon 11 CF Powder

Light and very stiff. A printed option for fixtures and brackets you'd otherwise machine.

6 kg

$999

Add

Elastomer

TPU 90A Powder

Rubber-like at 90A shore hardness. Gaskets, grips, and cushioning lattices, with no supports to cut out.

6 kg

$799

Add

See every SLS powder we carry ›

Complete your setup

Recover, finish, repeat

Went with the Complete package? You're set; grab spares here. Started smaller? Add the Fuse Blast first. It's the piece that turns a pile of powdery parts into finished ones without someone at a blast cabinet.

Powder recovery & finishing

Recover

Fuse Sift

Depowders parts in about 10 minutes, then recovers, doses, stores, and mixes powder in one enclosed station.

$9,999

Add

Finish

Fuse Blast

Automated cleaning and polishing. Finished parts in about 15 minutes, without a bead-blast cabinet and a person holding the gun.

$13,999

Add

Finish

Fuse Blast Polishing System

Adds polishing to the Fuse Blast for a smooth, semi-gloss surface.

$2,699

Add

Chambers, tools & spares

Throughput

Fuse 1 Build Chamber

Swap chambers and start the next build while the last one cools. The cheapest way to more builds per week.

$3,999

Add

Spare

Fuse 1 Powder Cartridge

Fill a spare so the next build is ready to load.

$149

Add

Manual

Fuse Depowdering Kit

The manual depowdering station. Included in the Starter package.

$999

Add

Setup

Fuse 1 Printer Stand

Puts the printer at working height.

$299

Add

Cleanup

Industrial Vacuum 110V

Formlabs' vacuum for cleaning up powder around the printer and Sift. Included in the Standard package.

$2,999

Add

Licenses

License

Open Material Mode (Fuse 1 generation)

Lets you run third-party powders with your own print parameters.

$11,899

Add

More ways to buy

Printer only, or a whole fleet

Already have depowdering covered? Buy the printer by itself. Setting up production? The four- and twelve-printer packages share Sift and Blast stations across the fleet, and we quote them with install and training.

Printer only

Fuse 1+ 30W Printer

Printer with one build chamber. For shops that already have a depowdering setup.

$24,649

Add

4 printers

Production Package

Four printers, four build chambers, Fuse Sift, Fuse Blast with the polishing kit, and 200 kg of Nylon 12. List price $150,437.

Quote

12 printers

Production Fleet

12 printers, 21 build chambers, 3 Fuse Sift, 3 Fuse Blast, and 3 industrial vacuums. For a service bureau. List price $564,825.

Quote

Why Fuse 1+ 30W

SLS: easier and faster than ever

SLS used to mean a six-figure machine, three-phase power, and a full-time operator. The Fuse 1+ brought it down to a benchtop footprint and a standard circuit, and per Formlabs, more than half of the world's SLS users now run a Fuse.

No supports

Pack the whole chamber

Unsintered powder holds every part in place while it prints, so there are no supports to design or cut off. Stack parts in 3D, nest small ones inside big ones, and fill the 165 x 165 x 300mm chamber top to bottom. PreForm does the packing automatically.

30W laser

Tough parts overnight

A 30W Ytterbium fiber laser sinters at 0.063 kg/hr. Load a packed build at the end of the day and have parts the next morning, in Nylon 12, Nylon 11, glass- or carbon-filled nylon, or TPU.

Closed loop

Reuse the powder you didn't sinter

Fuse Sift recovers unsintered powder, mixes it with fresh, and doses it back into the cartridge. Less powder in the trash means a lower cost per part, and Fuse Blast finishes the parts in about 15 minutes.

120V

Fits a normal shop

A dedicated 120V, 15A circuit and two-stage HEPA and carbon filtration on the exhaust. The printer sits on a 4.8 sq ft footprint: no facility retrofit, no ventilation project.

Cost per part

In-house beats outsourced

Formlabs priced two real shop parts four ways. Injection molding still wins on piece price, but you wait 5–6 weeks and pay for a mold first. Against outsourced SLS and machining, the Fuse 1+ wins on cost and on lead time.

Nylon 11 Powder

PCB jig

Fuse 1+ in-house

$10.70

2 days

Outsourced SLS

$47.24

10 days

Outsourced machining

$192.01

13 days

Injection molding

$4.99

5 weeks

Nylon 12 Powder

Eaton centering block

Fuse 1+ in-house

$9.03

in-house

Outsourced SLS

$40.25

6 days

Outsourced machining

$103.34

20 days

Injection molding

$4.25

6 weeks

Formlabs' cost-per-part examples, with a 10% powder discount applied. Bulk powder pricing starts at 20% off at 50 kg, down to $45/kg.

Start with one

Add printers when the orders show up

You don't have to buy a production cell on day one. Fuse Sift and Fuse Blast are shared across printers, so capacity grows one printer at a time.

1

Industrial SLS in an office

A dedicated 120V circuit and a 4.8 sq ft footprint. Prototypes on demand, short runs overnight.

2

Redundancy

A second printer means a maintenance day or a long build never stops parts from going out the door.

3+

A fleet

One Fuse Sift and one Fuse Blast serve several printers. The Production packages are built around exactly this.

What people make with it

End-use parts, not just prototypes

Nylon SLS parts go into cars, drones, and products people buy. These are Formlabs customers shipping Fuse parts.

Automotive · end-use

Seat clips in the BMW X7 (Brose)

Read the case study ›

Aerospace

Drone frames and hardware

Read the case study ›

Consumer products

Small-batch consumer product (Ken Pillonel)

Read the case study ›

Entrepreneurs

A one-person manufacturing business (ZapWizard)

Read the case study ›

Deutsche Bahn

Fuse printers running 24/7, all year

Case study ›

MOSOLF

The Fuse 1+ covers about 80% of its needs

Hyphen

Prints in-house 9 times out of 10, because outsourcing takes about 3x as long

Case study ›

Heidelberg

Prints overnight, tests at the customer's site the next day

Case study ›

Customer results as published by Formlabs. Case studies open on formlabs.com.

Fuse 1+ vs. compact SLS and MJF

Fuse 1+ 30W vs. HP MJF 1200, Sinterit Lisa X & Raise3D RMS220

These are the compact powder bed printers people cross-shop against the Fuse 1+. Each one wins a line or two on a spec sheet. Put the whole picture together (powders you can run today, a published cost model, the easiest install, a finished-part workflow, and 3,000+ machines already in the field) and the Fuse 1+ is the one we'd put in your shop. Every number below is from the manufacturer's own published specs and store pages.

Fuse 1+ 30W vs. HP Jet Fusion

Multi Jet Fusion

Fuse 1+ 30W vs. Sinterit Lisa X

Compact diode-laser SLS

Fuse 1+ 30W vs. Raise3D RMS220

Compact fiber-laser SLS

 

Formlabs Fuse 1+ 30W

HP MJF 1200

Sinterit Lisa X / Suzy

Raise3D RMS220

Published price

$24,649 (printer)

Under $60,000 (bundle ceiling)

$28,990 Lisa X · $25,990 Suzy

$34,999 (with one build unit)

Build volume

8.2 L

~12 L

7.7 L

~17 L

Process

30W fiber laser SLS

Multi Jet Fusion: fusing + detailing agents, printheads

Diode laser SLS

75W fiber laser SLS

Powders today

7, incl. Nylon 12 White, Nylon 11 CF, TPU 90A

1 at launch (HP High Reusability PA 12)

About 9; every nylon is grey or black

8; mostly black, the only white one is a TPU

Published packing density

30%+ by volume

Up to 20%

Not published

20% by weight (speed reference, not a max)

Power

One 120V, 15A circuit; Nylon 12 prints in air

200–240V, two 16A circuits

Wall socket, ~0.85 kW average

230V, 15A; built-in nitrogen generator needs shop air

Full setup

$56,902 Complete: printer, Sift, Blast, 2nd chamber

Under $60,000 bundle; agent and printhead pricing not published

$45,600 Performance Set

~$60,000: printer, C220-P, B520, 2nd build unit (install extra)

Shipping

Now, with 3,000+ Fuse units in the field

Early 2027

Now

Since 2026

HP MJF 1200

A machine you can't buy yet

HP's newest machine gives you about 12 L and an easy install. It runs one powder at launch, and HP hasn't published agent or printhead pricing, so you can't model cost per part on it yet. The Fuse 1+ is less than half HP's price ceiling, runs seven powders, and ships today.

Raise3D RMS220

More chamber, more unknowns

The RMS220 has a bigger chamber (about 17 L) and switches powders faster. But it's a first-year platform, it needs a 240V circuit and shop air, and Raise3D doesn't publish a PA 12 refresh rate or a max packing density, the two numbers that decide your cost per part. Its powders are almost all black, with no white nylon and no carbon fiber nylon. The Fuse 1+ publishes both numbers, prints white and carbon fiber today, and has 3,000+ units of debugging behind it.

Sinterit Lisa X / Suzy

Smaller, pricier, and only grey

Sinterit's 7.7 L is smaller than the Fuse 1+'s 8.2 L, and the Suzy costs about $1,300 more than a Fuse 1+ printer. Its diode laser needs carbon black in the powder to sinter, so every Sinterit nylon is grey or black. Its free open-material policy is nice for labs developing their own powder. For everyone making parts, the Fuse 1+ prints white, carbon fiber, and TPU today, and finishes them in a Fuse Blast instead of at a bench with a brush.

Facility

The easiest install of the four

One dedicated 120V circuit, and Nylon 12 prints in plain air: no nitrogen, no compressor for the printer, no 240V run. Of these four machines, the Fuse 1+ is the easiest to put in a building.

Specs and prices from each manufacturer's published pages as of October 2026. HP's MJF 1200 price is HP's published ceiling. Raise3D's setup total uses Raise3D store prices for the printer, C220-P, and second build unit, plus the B520 at $9,999 as reported by All3DP. Comparison images from Formlabs.

Free software · Windows & Mac

Try it in PreForm first

PreForm is the free software behind every Formlabs printer: no license, no annual fee, no install limit. Load your own part, pick Fuse 1+ 30W, and you get the real print time, material use, and a printability check before you buy anything.

✓  Automatic 3D packing fills the chamber for you, with orientation locks for critical parts

✓  Real-time print time and powder estimates, plus printability checks

✓  Opens STEP, SolidWorks, and CATIA files directly

✓  Free Dashboard to track builds and printers from anywhere

Download PreForm (free)

Direct download: Windows · Mac (Apple Silicon) · Mac (Intel)

From file to finished part

The Fuse 1+ workflow

PreForm · free

Prepare

Auto-pack the chamber for density, then orient, hollow, and label parts. Imports STL, OBJ, 3MF, STEP, SolidWorks, and CATIA.

Download PreForm (free)

Fuse 1+ 30W

Print

Load the build chamber and print. Track progress on the touchscreen or remotely through Dashboard.

Fuse Sift

Recover

Break the build out in an enclosed station, recover the unsintered powder, and mix it with fresh for the next build.

Fuse Blast

Finish

Automated cleaning and optional polishing. Finished parts in about 15 minutes.

By the numbers

Fuse 1+ 30W

30W

Fiber laser

Ytterbium, 247 µm spot

165 x 165 x 300mm

Build volume

No supports needed

110 µm

Layer thickness

0.063 kg/hr

Throughput

Per Formlabs

7

Formlabs powders

+ Open Material Mode

120V

Power

15A dedicated circuit

4.8 sq ft

Footprint

Printer only

~15 min

To finished parts

With Fuse Blast

Which package?

Compare Fuse 1+ packages

 

Starter

Standard

Complete · our pick

Price

$24,999

$42,094

$56,902

Fuse 1+ 30W printer

✓

✓

✓

Build chambers

1

1

2

Powder cartridges

1

1

2

Depowdering

Depowdering Kit (manual)

Fuse Sift

Fuse Sift

Printer stand

—

✓

✓

Industrial vacuum

—

✓

—

Fuse Blast + polishing kit

—

—

✓

Add to cart

Add to cart

Add to cart

Technical specs

Full Fuse 1+ 30W specifications

Technology

Selective laser sintering (SLS) · Class 1 laser product

Layer thickness

110 µm (0.004 in)

Laser spot size

247 µm (FWHM)

Hopper capacity

14.5 L

Print environment

Air, or nitrogen via the external inert gas interface

Materials

Nylon 12, Nylon 12 White, Nylon 12 Tough, Nylon 12 GF, Nylon 11, Nylon 11 CF, TPU 90A · third-party with Open Material Mode

Weight

120 kg (265 lb) without build chamber or powder

Startup time

Under 60 minutes

Connectivity

Wi-Fi (2.4 / 5 GHz), Ethernet (1000 Mbit), USB 2.0

Software

PreForm (free), Dashboard

Build volume

165 x 165 x 300mm (6.5 x 6.5 x 11.8 in)

Laser

Ytterbium fiber, 30 W max, 1070 nm

Throughput

0.063 kg/hr

Internal temperature

Up to 200ºC (392ºF)

Filtration

Pressure-controlled two-stage filtration, replaceable HEPA and carbon

Printer dimensions

64.5 x 68.5 x 107 cm (165.5 cm tall with stand)

Power

US: 120 VAC, 15 A dedicated circuit · EU: 230 VAC, 7.5 A

Operating environment

18–28ºC, relative humidity under 30%

Printer control

10.1-inch touchscreen · live camera feed · SMS/email alerts via Dashboard

Specs from Formlabs. Depowdering and finishing times are Formlabs' figures for Fuse Sift and Fuse Blast.

From the Vision Miner YouTube channel

More Fuse 1+ videos

Alt image

MASSIVE Nylon 12 Batch Print on the Formlabs Fuse 1+ 30W

Alt image

Formlabs Fuse 1+ 30W Complete Workflow POV: Nylon 12 SLS

Alt image

How We Use the Fuse 1+ 30W to Make Parts for Our 22 IDEX
Alt image

Why Nylon 12 Took Over Industrial 3D Printing

Alt image

Formlabs Now at Vision Miner: Form 4, 4L, and Fuse 1+ 30W

Alt image

Business Guide to 3D Printing: What Printer Makes Sense?

See every video on YouTube ›

Buy it from people who answer the phone

American service & support

01

Real people, here in America

No scripted auto-attendant. Call 833-774-6863 or email contact@visionminer.com. We cross-train our team on everything we sell, so there's a good chance whoever picks up can solve the problem on the spot.

02

Financing in 60 seconds

Apply right here › The 60-second application opens on this page. Spread the printer over monthly payments instead of waiting on next year's budget.

03

Quotes for purchasing

Need a formal quote for a PO? Request one here and we'll put it together for your purchasing team.

FAQ

Fuse 1+ questions

How long does a build take?

It depends on how full you pack the chamber. Formlabs rates the Fuse 1+ at 0.063 kg/hr. The fastest way to get a real number is to download PreForm, load your parts, and let it pack the build: it shows the print time.

Do I need nitrogen?

No. The Fuse 1+ prints in air. Nitrogen is an option through the inert gas interface. Call us and we'll tell you whether your material and parts benefit from it.

What power does it need?

In the US, a dedicated 120V, 15A circuit. No three-phase power.

Why do you recommend the Complete package?

Because SLS parts come out of the chamber covered in powder. Without Fuse Sift and Fuse Blast, someone brushes and bead-blasts every part by hand, and that labor eats the time the printer saved you. The Complete package is the full workflow, with a second chamber so the printer never waits on cooldown.

Can I start smaller?

Yes. The Starter package uses the manual Depowdering Kit, and the Standard adds the Sift. Both work. You'll want a Fuse Blast as soon as you're running more than a few builds a month.

Fuse 1+ or Fuse X1?

Fuse 1+ for a small footprint, a 120V circuit, and a $24,649 start. Fuse X1 when you need 7.5x the build volume, parts up to 713mm long, and about 5x the throughput, at $84,999 on a 208–240V single-phase circuit.

Can I finance it or buy on a PO?

Both. Apply for financing here › (the 60-second application opens on this page), or request a formal quote for your purchasing team.

Questions? Give us a call.

Give us a call, shoot us an email. We help people figure this out every single day.

Request a quote

Call 833-774-6863

Request a sample part

Download PreForm (free)

Related Products

Fuse 1+ 30W Production Fleet Package

Fuse 1+ 30W Production Fleet Package

$564,825.00

My Wishlist

View wishlist

Wishlist is empty.

Compare

Shopping cart

Your cart is empty.

Return to shop
close