The Intamsys Funmat HT Enhanced is designed specifically to 3D print high-performance functional materials like PEEK, PEI and PPSU, in addition to a broad range of engineering thermoplastics.
Users can achieve 50-micron, high-resolution, industrial-quality 3D printing with the Intamsys Funmat HT.
Build Volume:
260 x 260 x 260 mm
Designed for materials which perform at operating temperatures past 300°C - extruded at 400°C and above, they are the world's highest-performing polymers.
These materials exhibit excellent resistance to abrasion, chemicals, solvents, grease & oils, radiation, and perform in a variety of other extreme environments.
Many of these polymers are used to replace metal; combining high strength-to-weight ratio and rigidity with chemical resistance and heat deflection, they can often be used where metal cannot.
Filament Absent Warning
When filament is getting low, a sensor triggers an alarm, and allows you to add new material. Never worry about low filament again!
Battery Backup
Power surges and failures? The Funmat HT has it's own battery backup to pause prints, and resume when the power returns. Essential when you're running important projects, or expensive filaments.
Auto Bed Leveling
Bed leveling is easier than ever, with a new 3-point automatic leveling system. You can also manually level as before, if needed.
Accurate to 12.5 Microns
Cutting-edge motors and drivers enable extremely high precision, resulting in incredible print quality, up to 12.5 microns
Pre-Configured Slicer from INTAMSYS
Printer profiles are pre-configured in the INTAMSUITE software for easy operation, straight out of the box
Compatible with Industry-Standard Slicing Software
Not feeling INTAMSUITE? You can also use the latest Cura, Simplify3D, Slic3r, and other toolpath generators (recommended)
Printing Technology
Fused Filament Fabrication, or Fused Deposition Modeling (FFF, FDM)
Build Volume
260 x 260 x 260mm
10.2" x 10.2" x 10.2"
Build Platform Material
Carbon Fiber Platform
Silicone Heater
Ceramic Glass
3-Point Automatic Leveling, Manual Leveling
Layer Resolution
0.05-0.3mm, 50 Micron
100-200 Micron Standard
Speeds
Movement: 300mm/s
Printing: Avg ~100mm/s
Filament Diameter
Standard 1.75mm Filament
Open Material System
Position Accuracy
12.5 Microns X/Y
50 Microns (minimium layer height)
Firmware
Marlin Fork from 2017
Extruder Style
Direct Drive
Extruder Temperature
High-Temp 450°C (842°F)
Normal-Temp 280°C (536°F)
Build Plate Temperature
160°C (320°F)
Chamber Temperature
90°C (320°F)
Input File Type
Power Consumption
1200W, 110V, 10A breaker minimum. We run two Funmat HT's at full heat on a single 20A breaker.
Machine Dimensions
D 19.25" W 21" H 26"
Allow 12" on right side and top, for bay doors to open
Shipping Weight & Dimensions
165lbs, 75kg
35"x26"x31" Dimensions
Ships on mini-pallet
Materials
Any 1.75mm Filament, including: PEEK, PEI, PEI Blends, PPSU, PA/CF, PC, PC Alloys, PA, ABS, Carbon Fiber-Filled, Metal-Filled, Fiberglass-Filled, Nylon, ASA, PETG, ESD-Safe, HIPS, TPU, PLA, PVA, Open Material System
Warranty
One Year Manufacturers Warranty, except on consumables
This is an Additive Manufacturing Machine. The buyer alone is responsible for checking the quality and suitability of goods before a purchase is made. A skilled operator is needed to properly manufacture parts.
Training Packages are available, if needed.
RETURNS ARE NOT ACCEPTED FOR THIS MACHINE.
Manufacturer Warranty still applies.
