Slicing Software and Profiles

for the Intamsys Funmat HT

The Intamsys Funmat line of Industrial 3D Printers are based on 
standard Reprap/Marlin/Sprinter firmware, and are 
therefore compatible with an array of 3D Gcode slicing software.  

3D Slicers We Recommend


Cura has come quite far since the early days, now rivaling S3D for the crown of 3D slicers. With many experimental features, along with massive support from the community, Cura is a world-class slicer, and best of all, it's completely free. Cura is a great option when you're a bit more advanced with your prints.

Simplify 3D

Simplify3D continues to prove itself as one of the best slicer engines on the market -- as one of the few premium (paid) slicers, it has certain features that make it better for many parts, whether that be the multi-process capabilities, or simply the way it decides to make the toolpath for different geometry, we love, and generally opt for using S3D.


IntamSuite is the slicing software released by Intamsys for the Funmat line of printers. Based on CURA , it comes with preset profiles for PEEK, PEI, PPSU and other high-temp materials, set up for the Funmat 3D Printers. 

This slicer has improved greatly over the years, with more features from the latest version of CURA included. A great place to start!

For the Funmat Pro 410, especially with Dual Extrusion prints, it works fantastic.

The G-Code scripts:

Start G-Code 

G28 ; home all axes

; include G29 to autolevel REMOVE AS NEEDED 

M355 S1; 

; include M141 S90 to turn chamber to 90C MODIFY OR REMOVE as needed 

M300 S440 P5000; 

G92 E0 ; set current extruder position as 0 so that E15 below makes sense 

G1 X10 Y-100 Z0.2 F2400.0 ; move to just on the bed 

G1 X10 Y70 E15 F1200.000 ; extrude a line of filament along the right edge of the bed 

G92 E0 ; set E to 0 again because the slicer's next extrusion is relative to this 


End G-Code 

M104 S0 ; turn off extruder 

G91 ;relative positioning 

G1 E-1 F300 ;retract the filament a bit 

G1 Z+2 E-5 X-20 Y-20 F2000 ; move Z up a bit and retract filament even more 

G28 X0 Y0 ; move X/Y to min endstops 

M84 ; steppers off 

G90 ; absolute positioning