2. Material Data

Filament Material and Technical Data Sheets

 

3DXTech Filament Datasheets

 

Grade

TDS

SDS

Printing Difficulty Level*
CarbonX™ Carbon Fiber PEEK Carbon Fiber PEEK PEEK 3D Filament Carbon Fiber  EXPERT
CarbonX™ Carbon Fiber PEI Carbon Fiber Ultem Carbon Fiber Ultem Filament SDS  EXPERT
CarbonX™ Carbon Fiber NYLON Gen3 Carbon Fiber Nylon Filament TDS Carbon Fiber Nylon Filament SDS  INTERMEDIATE
THERMAX™ PEKK PEKK Kepstan Arkema 3D Filament Antero PEKK Kepstan Arkema 3D Filament Antero  EXPERT
THERMAX™ PEEK PEEK 3D Filmanet Carbon Fiber PLA SDS EXPERT 
THERMAX™ PEI [9085] Ultem 9085 3D Filament Ultem 9085 Filament SDS  EXPERT 
THERMAX™ PEI [1010] Ultem 1010 Filament Ultem 1010 Filament SDS  EXPERT 
THERMAX™ PPSU PPSU PPSF Filament PPSU PPSF Filament SDS  EXPERT 
THERMAX™ PSU PPSU PPSF Filament PSU Filament SDS  EXPERT 
THERMAX™ PPS PPSU PPSF Filament PPSU PPSF Filament  ADVANCED
FluorX™ PVDF PPSU PPSF Filament PPSU PPSF Filament  ADVANCED
REACH Documentation    REACH Document

Recommended Printing Experience

Novice:  A beginner using an entry-level 3D printer should have minimal problems using this material
Intermediate:  User has several months of experience with a moderate to high quality printer
Advanced:  User has > 1 year of printing experience and is using a high quality commercial printer
Expert:  User has significant amount of experience and is using a high-performance or heavily modified printer

These categories are somewhat arbitrary, but come from many years of our own printing experience as well as troubleshooting with customers.




ESSENTIUM Datasheets

PCTG

HTN

HTN CF25



INTAMSYS Datasheets

SABIC Datasheets

Solvay Datasheets



General Printing Data

>

Printing Specs

 Nozzle Temp Build Plate Temp Chamber Temp Dry Material? Dry Temp Dry Time Annealing Anneal Temp Anneal Time
ABS 240-255°C 90°C 70°C
Top open		 sometimes, rarely 60C 1-4 hours No
CFPA6 (CF Nylon) 245-260°C 90°C 70°C Yes 70°C 3-14 hours No
Nylon 240-255°C 90°C 70°C Yes 70°C 3-14 hours No
PC 255-270°C 100°C 70°C Yes 70°C 3-8 hours No 120°C 1-4 hours
PEEK 400-415°C 160°C 90°C Yes 70-120°C 3-48 hours Yes 160°C 2-4 hours
PEI (1010) 355-370°C 160°C 90°C Yes 70-120°C 3-24 hours Yes 160°C 2-4 hours
PEI Blend (9085) 340-360°C 160°C 90°C Yes 70-120°C 3-24 hours Yes 160°C 2-4 hours
PLA 195-210°C 60°C 23°C
Doors Open		 Rarely 60°C 1-3 hours No
TPU Flex 240°C 90°C 23°C
Top open		 Yes 60°C 1-4 hours No
3DXTech HTN+CF 285-315°C 110-120°C 80-120°C Yes 120 4-12hrs
3DXTech CFPA12 265-280°C 90-110°C 50-90°C Yes 90°C 4-12hrs
3DXTech PA6 GF30 260-280°C 60-75°C 40-80°C Yes 70°C 4-12hrs
Essentium HTN 270-315°C 70-120°C 80-120°C Yes 120°C 4-12hrs
3DXTech CFPC 280-310°C 110-120°C 50-90°C Yes 110°C 4-12hrs
3DXTech PSU 350-380°C 140-160°C 90°C+ Yes 120°C 4-12hrs
3DXTech PPS 315-345°C 120-160°C 90°C+ Yes 120°C 4-12hrs
3DXTech PP+CF 220-250°C 23-60°C None No
3DXTech PVDF 265°C 110-130°C None No
3DXTech PCTG 250-270°C 70-80°C None Yes 70°C 2-8hrs

 

 

 

ULTEM™ is a trademark of SABIC, or its subsidiaries or affiliates.