Sidebar blog
Nano Polymer Adhesive is designed to minimize failures on high-end polymers. Whether you run a print farm or make single, high-temperature, functional 3D prints, this...
Vision Miner’s Patrick Smith and Rob Lent sit down to talk about why choosing high-temperature plastics is the smart, long-term investment for many businesses in...
Every failure is another step towards mastery. Every failure teaches you something new about your part that you must master to get better. And, every...
For 3D printers, cooling settings affect the blow rate of the fan mounted at the head of the print nozzle. Interestingly, this fan actually blows...
The balance between nozzle diameter and layer height comes down to both personal preference and project requirements. If you need a part fast and it...
The purpose of a heated bed on 3D printers is to provide a semi-warm place for the initial layers to fuse together and maintain strength...
The key to supports is understanding how plastic rests after being printed. Naturally, 3D printers are incapable of printing in mid-air, so we utilize support...
In today’s article, we take a brief look at temperature tuning for 3D printers. While this will change depending on each material you go with,...
The trade-off between speed and quality is a matter of the hardware in a 3D Printer. Do you need a strong part where looks don't matter...
In 3D Printing, retraction pertains to the process of physically retracting material within the printing head during movement. Tuning your retraction is important because too...
When people normally hear about 3D-Printing, they have the idea of a microwave where you can drop your part in, press a button, and wait...
PEEK Printing can be a challenging, yet rewarding experience. At Vision Miner, it’s our job to maximize the reward and minimize all of your challenges....
