The Intamsys Funmat Pro 410 is designed specifically to 3D print high-performance functional materials with support material, like PEEK, PEI and PPSU, in addition to a broad range of engineering thermoplastics -- from Carbon Fiber Nylon to Polypropylene, this machine covers the whole gamut of materials.
Users can achieve 50-micron (0.05mm), high-resolution, industrial-quality 3D printing with the Intamsys Funmat Pro 410.
305 x 305 x 406 mm
Designed for materials which perform at operating temperatures past 300°C - extruded at 400°C and above, they are the world's highest-performing polymers.
These materials exhibit excellent resistance to abrasion, chemicals, solvents, grease & oils, radiation, and perform in a variety of other extreme environments.
Many of these polymers are used to replace metal; combining high strength-to-weight ratio and rigidity with chemical resistance and heat deflection, they can often be used where metal cannot.
With two nozzles going up to 500ºC, you can print virtually any filament on the market -- not only that, but you can use different colors, support materials, or even combine Flexible with Rigid materials to create living hinges and other features not possible with a single nozzle.
Larger Build Volume
Everyone wants a cubic foot -- we finally have it! At 12"x12"x16", this printer is large enough for 90% of parts in most situations. Whether you're printing jigs & fixtures, engine manifolds, or finely-detailed medical device parts, this printer handles it like a charm. f
Auto Bed Leveling
Bed leveling is easier than ever, with a new 3-point automatic leveling system. You can also manually level as before, as needed.
Highly Accurate Motion System
Exceeding the industry standard, the Pro 410 is built with linear rails, high-end motor drivers, and a robust user interface.
Pre-Configured Slicer from INTAMSYS
Printer profiles are pre-configured in the INTAMSUITE software for easy operation, straight out of the box.
Compatible with Industry-Standard Slicing Software
Not feeling INTAMSUITE? You can also use the latest Cura, Simplify3D, Slic3r, and other toolpath generators (recommended)
Fused Filament Fabrication, or Fused Deposition Modeling (FFF, FDM)
305 x 305 x 406mm
12" x 12" x 16"
Build Platform Material
Carbon Fiber Platform
3-Point Automatic Leveling, Manual Leveling
0.05-0.4mm, 50 Micron
100-200 Micron Standard
Movement: 500mm/s Max
Printing: Avg ~30-100mm/s depending on material
Standard 1.75mm Filament
Open Material System
12.5 Microns X/Y, 1.5 Micron Z
50 Microns (minimium layer height)
Marlin (unfortunately source is not available from Intamsys)
Over Current & Temperature, Leakage Current
USB Disk, Wifi, Ethernet, Internal SD, Cloud
Build Plate Temperature
Simplify 3D, Cura, Intamsuite
Input File Type
3000W, 200~240V/15A, 50~60Hz
720 × 680 × 1470 mm
28.4" x 27.8" x 57.9"
Shipping Weight & Dimensions
69" Tall, 34" Deep, 33" Wide
Ships in full crate
Any 1.75mm Filament, including: PEEK, PEI, PEI Blends, PPSU, PA/CF, PC, PC Alloys, PA, ABS, Carbon Fiber-Filled, Metal-Filled, Fiberglass-Filled, Nylon, ASA, PETG, ESD-Safe, HIPS, TPU, PLA, PVA, Supports, Fully Open Material System
One Year Manufacturers Warranty, except on consumables
CE, SGS, FCC
Operating Temperature: 15~30°C/59~86°F
Storage Temperature: -10°C~50°C/14~122°F
Operating Humidity: 30%~70%
Storage Humidity: 10%~85%
This is an Additive Manufacturing Machine. The buyer alone is responsible for checking the quality and suitability of goods before a purchase is made. A skilled operator is needed to properly manufacture parts.
Training Packages are available, if needed.
RETURNS ARE NOT ACCEPTED FOR THIS MACHINE.
Manufacturer Warranty still applies.